The Ultimate Guide to

Basic Guide to Finding Hidden Valves and Piping

It is important that you know the details of your home like the back of your hand in case you are a homeowner. It is important to ensure that you are keen as well and are able to know where things like gas piping as well as valves are so that you are able to switch them off in case of an emergency. Some of the ways that you can be able to find out where the various shut off valves are located are briefly highlighted below.

There is a high probability that the the gas valves for your home will be located before the gas meter in case you have natural gas. The nub is usually rectangular in shape and uses a wrench but for the most part gas companies usually do not recommend interfering with this valve. A second valve is usually located further down the line or where the gas pipe first enters.

If you have a gas pipe then the valve will most likely be located in the utility room and will be made from flexible copper. When you have such a piping system you are usually sure that the gas system that you have usually has a high pressure. Such gas systems usually have the shutoff valve near the water heater or the furnace.

There is a high chance that water valves usually have two shut off valves since one is located before the meter and the other located after the meter. Should you be in an environment where it gets really cold then the shut off points is most likely to be located inside the home to prevent things like freezing. There is a high chance that if you live in milder climates, then the water shutoff valve will be located in an underground box with a lid or next to an exterior wall.

In case you are finding it hard to locate the water shut off valve then it is important for you to look at the property report that was given to you during the last phase of the property purchase. By looking at the report, it will be easy for you to be able to find out where the water shut off valve is located. There is also a high probability that the picture of what the valve looks like will be drawn so that you are able to know what it looks like.

With most automatic sprinklers located underground, there is a very high chance that they may be a little bit harder to find. For such valves using a metal detector may come in handy since they are usually metallic in nature. It is easy for you to be able to know more info. about where to start when you have a plan even though it may not point out the exact location of the valve.

You may also like...